 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SnapLED 150 LEDs Technical Data HP SunPower Series HPWS-TH00 HPWS-FH00 HPWS-TL00 HPWS-FL00 Benefits * Fewer LEDs Required * Lower System Cost * 3-Dimensional Array Design Applications * Automotive Lighting - Rear Combination Lamps - Front Turn Signal Lamps - High Mount Stop Lamps - Indirect Lighting * Solid State Lighting and Signaling Features * High Flux Output * Designed for High Current Operation * Low Thermal Resistance * Low Profile * Solderless Mounting Technique * Mounted on Formable Substrate * Meets SAE/ECE/JIS Automotive Color Requirements Description Using Hewlett-Packard's patented solderless clinch technology, SnapLED 150 emitters are assembled onto a formable metal substrate which offers both styling flexibility and thermal conductivity unmatched by any other LED assembly. The package's efficient optical design, high brightness material, and high current capability drastically reduce the number of LEDs required for lighting functions - thereby lowering the total cost. Selection Guide Part Number HPWS-TH00-00000 HPWS-FH00-00000 HPWS-TL00-00000 HPWS-FL00-00000 LED Color TS AlInGaP Red-Orange TS AlInGaP Amber Total Flux v (mlm) @ 150 mA[1] Min. 6000 3000 Total Included Angle 0.90 V (Degrees)[2] Typ. 120 70 120 70 Notes: 1. V is the total luminous flux output as measured with an integrating sphere after the device has stabilized (R j-a = 100C/W, TA = 25C). 2. 0.90 V is the included angle at which 90% of the total luminous flux is captured. See Figure 5. 2 Outline Drawing 5.00 0.20 (0.197 0.008) C 6.00 0.20 (0.236 0.008) A 7.60 0.30 (0.299 0.012) CFER 1.30 x 1.30 (0.051 x 0.051) 7.60 0.30 (0.299 0.012) 11.50 (0.453) 15.30 0.50 (0.602 0.020) 2 TYP. 2.50 (0.098) Tx00 3.30 (0.130) Fx00 90 2 TYP. 2.50 0.50 (0.098 0.004) 5.00 0.30 (0.197 0.012) 4.10 (0.161) 0.51 0.10 (0.020 0.004) 4.7 Notes: 1. Dimensions are in millimeters (inches). 2. Dimensions without tolerances are nominal. 3. Cathode lead is indicated with a "C" and anode lead is indicated with an "A." 4. Special characteristics are designated with a triangle. 5. Clinch joint locations shown in dashed lines on top view of part (11.50 mm spacing). Absolute Maximum Ratings at TA = 25C Parameter DC Forward Current[1,2] Pulsed Forward Current[3,4] Power Dissipation Reverse Voltage (IR = 100 A) Operating Temperature Range Storage Temperature Range High Temperature Chamber LED Junction Temperature HPWS-Tx00/Fx00 150 200 475 10 -40 to +100 -55 to +100 125C, 2 hrs. 125C Units mA mA mW V C C Notes: 1. Operation at currents below 20 mA is not recommended. 2. Derate linearly as shown in Figure 3a. 3. Amber only at simulated turn signal conditions of f = 0.5 - 2 Hz and 50% duty factor. 4. Derate linearly as shown in Figure 3b. 3 Optical Characteristics at TA = 25C, IF = 150 mA, RJ-A = 100C/W Peak Wavelength peak (nm) Typ. 630 596 Color, Total Ratio of Luminous Dominant Included Intensity to Wavelength Angle 0.90 V Total Flux d (nm)[2] (Degrees)[3] Iv (mcd)/v (mlm) Typ. Typ. Typ. 621 120 0.6 594 70 120 70 2.0 0.6 2.0 Viewing Angle 2 1/2 (Degrees) Typ. 85 30 85 30 Device Type HPWS-TH00 HPWS-FH00 HPWS-TL00 HPWS-FL00 Total Flux v (mlm)[1] Min. 6000 3000 Notes: 1. v is the total luminous flux output as measured with an integrating sphere after the device has stabilized. 2. The dominant wavelength is derived from the CIE Chromaticity Diagram and represents the perceived color of the device. 3. 0.90 V is the included angle at which 90% of the total luminous flux is captured. See Figure 5. Electrical Characteristics at TA = 25C Forward Voltage VF (Volts) @ IF = 150 mA Min. Typ. Max. 2.15 2.55 3.03 2.15 2.65 3.15 Reverse Capacitance Breakdown C (pF) Thermal Speed of VR (Volts) VF = 0, Resistance Response @ IR = 100 A f = 1 MHz RJ-PIN (C/W) s (ns)[1] Min. Typ. Typ. Typ. Typ. 10 20 80 60 20 10 20 80 75 20 Device Type HPWS-xH00 HPWS-xL00 Note: 1. s is the time constant, e-t/ s. Projected Luminous Flux Category Availability [1] Part Number HPWS-xH00-L4000 HPWS-xH00-M4000 HPWS-xH00-N4000 HPWS-xL00-F4000 HPWS-xL00-G4000 HPWS-xL00-H4000 LED Color TS AlInGaP Red-Orange TS AlInGap Amber Total Flux v (mlm) @ 150 mA[2] Min. 1999 2000 2001 2002 2003 2004 2005 6000 8000 10000 3000 3500 4000 Notes: 1. LEDs will be available at the beginning of indicated years. 2. V is the total luminous flux output as measured with an integrating sphere after the device has stabilized (Rj-a = 100C/W, TA = 25C). 1.0 200 180 FORWARD CURRENT (mA) HPWS-xH00 RELATIVE INTENSITY HPWS-xL00 HPWS-xH00 160 140 120 100 80 60 40 20 0 1.5 1.7 1.9 2.1 2.3 2.5 2.7 2.9 3.1 FORWARD VOLTAGE (V) HPWS-xL00 0.5 AMBER RED-ORANGE 0 550 600 WAVELENGTH (nm) 650 700 Figure 1. Relative Intensity vs. Wavelength. Figure 2. Forward Current vs. Forward Voltage. 150 MAXIMUM DC CURRENT (mA) MAXIMUM DC CURRENT (mA) 200 180 1.0 0.9 100 C/W 150 C/W 200 C/W 250 C/W 135 120 105 RJ-A = 100 C/W 90 RJ-A = 150 C/W 75 60 45 30 15 0 0 20 40 60 80 100 120 RJ-A = 200 C/W RJ-A = 250 C/W RELATIVE LUMINOUS FLUX 100 120 160 140 120 100 80 60 40 20 0 40 60 80 RJ-A = 100 C/W RJ-A = 150 C/W RJ-A = 200 C/W RJ-A = 250 C/W 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 25 50 75 100 125 150 AMBIENT TEMPERATURE (C) AMBIENT TEMPERATURE (C) FORWARD CURRENT (mA) Figure 3a. HPWS-xx00 Maximum DC Forward Current vs. Ambient Temperature. Figure 3b. HPWS-xx00 Maximum Pulsed Forward Current vs. Ambient Temperature. Figure 4. HPWS-xx00 Relative Luminous Flux vs. Forward Current. 100 1.0 RELATIVE LUMINOUS INTENSITY 90 % TOTAL LUMINOUS FLUX 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -90 -70 -50 -30 -10 10 30 50 70 90 80 70 60 50 HPWS-Fx00 HPWS-Tx00 40 30 20 10 0 0 20 40 60 80 100 120 140 160 180 TOTAL INCLUDED ANGLE (DEGREES) OFF AXIS ANGLE (DEGREES) Figure 5. HPWS-xx00 Percent Total Luminous Flux vs. Total Included Angle. Figure 6a. HPWS-Tx00 Relative Intensity vs. Off Axis Angle. 1.0 RELATIVE LUMINOUS INTENSITY 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -90 -70 -50 -30 -10 10 30 50 70 90 For additional information, please refer to the HP AN 1149 Series. www.hp.com/go/led For technical assistance or the location of your nearest Hewlett-Packard sales office, distributor or representative call: Americas/Canada: 1-800-235-0312 or 408-654-8675 Far East/Australasia: Call your local HP sales office. Japan: (81 3) 3335-8152 Europe: Call your local HP sales office. Data subject to change. Copyright (c) 1999 Hewlett-Packard Co. Obsoletes 5968-6846E (7/99) 5968-7807E (10/99) OFF AXIS ANGLE (DEGREES) Figure 6b. HPWS-Fx00 Relative Intensity vs. Off Axis Angle. |
Price & Availability of HPWS-FL00
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |